Detergent-wetting agent for continuous pretreatment and dyeing with high emulsifying power; excellent stability in caustic soda
PROPERTIES
Composition
Ionic character
pH-value of a 10 % solution
Stabilities
Mixture of special sulphonates
Non-ionic /Anionic
7.0 – 8.5
VINAPOL NSD is stable to hard water, oxidizing and reducing bleaching agents and high amounts of electrolytes as well as the usual amounts of alkali and Acids. VINAPOL NSD is sensitive to frost; after having been exposed to temperatures essentially below the freezing Point, irreversible changes occur.
DILUTION
VINAPOL NSD can be easily diluted with hot water.
APPLICATION
Its wetting and washing effect is mostly independent of the pHvalue and the Temperature. Because of the anionic/non-ionic combination VINAPOL NSD is Washed out easily. VINAPOL NSD is also suitable for continuous processes. Because of its stabilities VINAPOL NSD can be applied in all wetting processes Except mercerizing. VINAPOL NSD is used as wetting and washing agent with good soil suspending properties and is well suited for desizing, alkaline scouring or kier-boiling, continuous Alkaline pre-treatment processes and reactive dyeing especially continuous. In pre-treatment processes the impurities of cotton are well dispersed. VINAPOL NSD is also effective in the subsequent wash off by separating the dissolved Impurities. There is no need to add detergents. Absorbency and re-wet ability of the goods are increased. Wetting agent in the pre-treatment of cellulose fibers The application amounts depend on the kind of pre-treatment and on the material.
RECIPE PROPOSALS
The following amounts can be taken as a guide: For grey goods in long liquor : 1.0 – 2.0 g/l VINAPOL NSD in short liquor : 2.0 – 3.0 g/l VINAPOL NSD in padding : 2.0 – 6.0 g/l VINAPOL NSD For wet goods in long and short liquors: 0.2 – 1.0 g/l VINAPOL NSD in padding liquors: 1.0 – 2.0 g/l VINAPOL NSD