Vinalube HC

Crease preventing agent thatused wet processing of heavy fabric, closely woven fabricand lycra.
It is built material that mainly composed offatty alcholester has excellent lubricating property for Exhaust
method.

PROPERTIES

Chemical character

Appearance

pH-value of a 10 % solution

Specific weight
at 20 °C

Mixture of polymers

Colorless to yellowish

6.7 – 8.0

1.01 ± 0.02

DILUTION

VINALUBE HC is added directly to the dyebath.

APPLICATION

VINALUBE HC gives good running properties to the material and avoids
the formation of creases. Sensitive qualities have better gliding properties
and tend less to form creases if there is less mechanical friction and
Less me chanicalload . The material keeps its soft handle.

VINALUBE HC increases the liquor viscosity besides gliding properties
So there will be better evennesses and a careful treatment of the material
& low foaming and can be used on all machines in cellulose Dyeing,
bleaching and for blended material.

Advantages

Improve fabrics with excellent gliding property in wet process;
markedly improve fabric’sSoftness after finishing.
Decrease rubbing between fabrics, fabric and equipment, preventing yarn
fuzzing and fabric being abraded.
Decrease crow’s feet caused of fabric crinkling.
Help Lycra, super-shrinking polyester fabric even shrinking, make fabrics flat
and no crease mark.
Has synergistic leveling action.

RECIPE PROPOSAL

VINALUBE HC is added to the liquor after wetting the material and before
adding further chemicals and dyestuffs. The product has to be added separately
because precipitations may result with other concentrated auxiliaries.

0.5 – 2.0 g/l VINALUBE HC in long liquors (above 1: 10)
1.0 – 2.0 g/l VINALUBE HC in short liquors (below 1: 10)

In Extreme Cases It is possible to apply higher concentrations without danger.