Vinalube BA

csm_textiles

Wet waxing agent for yarns

PROPERTIES

Chemical character

Appearance

pH-value of a 10 % solution

Ionic character

Stabilities

Paraffin emulsion containing synthetic material blends

Low-viscous emulsion, pale beige

5 ± 6

Non-Ionic

VINALUBE BA is stable to hard water hardness and
organic acids.
The product is sensitive to electrolytes like
sodium hydroxide, sodium chloride and sodium sulphate.
Therefore the application bath should be prevented
from such electrolytes to achieve optimum performance.

DILUTION

VINALUBE BA can be diluted with warm water.

APPLICATION

The product should always be applied in a fresh bath after bleaching or dyeing of the yarns.

VINALUBE BA advantages

There is no need for a rewinding process like in the case of solid paraffin treatment,
if so-called direct bobbins are used.
This makes it possible to deliver the bobbins directly to the knitter or weaver.
In case of a rewinding process, it can be carried out at high speed and there is definitely
less yarn breakage confers gliding properties to yarns by lowering the co-efficient of
friction which results in minimum yarn breakage during knitting or weaving.
Exhausts evenly and completely on the substrate it imparts antistatic properties to syntheti
yarn minimal effect on the degree of whiteness when applied on bleached yarns.
VINALUBE BA has a negligible volatility at higher temperatures and will not cause any
problems during drying under normal conditions.
VINALUBE BA imparts a soft fleecy handle to the yarns and sewability of the fabric made
out of yarn treated with this product is also considerably improved.
VINALUBE BA is specially suited to lubricate cotton and PAN yarns but it can also be
successfully applied ofother fibres.

RECIPE PROPOSALS

1.0 – 3.0 % VINALUBE BA
(on weight of material)
pH 5.5 – 6.0 with acetic acid
begin at 30°C and run for 10 min. at this temperature
and then heat up to 55°C @ 1°C / minute
treat at 55°C for 10 mins., drain the liquor.
A good alternate liquor circulation favours an even coating (e.g. 4 mins. Outsideinside,
2 mins. Inside-outside)
In case VINALUBE BA has to be washed out, the following recipe should be applied.
1.0 g/l VINALPOL GRN
2.0 g/l Soda ash
20 mins. at 95 –98°C

Shopping Basket